Log Lighter Valve Installation
Come to find out, the valve stem is exactly a 1/4 inch, much like a 1/4 drive socket. Steps to install your log lighter:
DIY Firpit Natural gas fire pit, Gas fire pits and Gas fires
1/2 straight gas ball valve (angled valve could work too)
Log lighter valve installation. Run 1/2 black iron gas line from valve under floor and stub up 2 centered left and right in the inner hearth two inches forward of the fireback. A12p, a17p, a24p, av12pcp, av12pbp, av17pcp, and av17pbp warning: A12n, a17n, a24n, av12pcn, av12pbn, av17pcn, and av17pbn lp gas kits:
As the subject indicates, i have a blue flame log lighter in my wood burning fireplace. Sioux chief hearthmaster™ polished chrome straight log lighter valve kit. Brrass key valve, log lighter gas valve, log lighter kit manufacturer / supplier in china, offering china supplier custom log lighter gas valve complete kit, china brass tankless water heater valve kit quick installation, factory lead free isolation valve kit for tankless water heater and so on.
Always use a pipe joint A listed dante products (gas) valve must be installed upstream of the log lighter. Run gas pipe to the log lighter.
Available in natural or lp gas. If the information in theses instructions is The straight model, log lighter sits beneath the fireplace grate and is designed to help ignite wood logs in a safer way by mixing air and gas together.
Lighter must be secured in a rigid manner.example: Sioux chief hearthmaster™ standard log lighter valve key in chrome. When cleaning the fireplace starter pipe, scattering of ashes would most probably happen, so you are advised to put on a mask to help protect your respiratory system.
Once the fireplace log lighter is removed, you can put some masking tape onto the area of the gas supply or valve to avoid scattered ashes from entering inside. The gas log lighter burner kit with valve by hearth products controls provides a high quality wood log lighter kit with a key valve. Run gas pipe to the log lighter.
The fireplace should be free of all debris. Use pipe fittings to support the opposite end of the lighter (3/8″ male npt) in contact with the floor or side of the fireplace. 3 run ½” gas pipe from the.
Determine which side of the firebox the valve will be installed. Turn log lighter valve off after logs have started to burn. The dante universal log lighter comes assembled with a 17″ burner pipe and universal mixer of your choice.
Turn log lighter valve on until bar ignites. Drill a 1¼” hole for the flange and valve. Bf log ligther installation guide author:
Sioux chief hearthmaster™ log lighter valve key in zinc. With a little creative tool usage, i used the back side of this. A listed blue flame gas valve must be installed up steam of the log lighter.
Use 1/2″ rigid pipe for gas inlet. Angled log lighter kits installation and operation instructions these instructions apply to the following models: Turn off the gas line to the firebox, or if necessary, the main gas line.
Drill a 1¼ hole for the. Plumb log lighter valve to 1/2 gas line in floor or wall within two feet of fireplace opening. Shut off gas to device.
The dante universal log lighter features an energy conserving air/gas mixing chamber for efficient operation. The high quality cold rolled steel or stainless steel material ensures a durable product with a heavy construction that's able to withstand the high heat of a natur. Thread the valve into the flange from below the floor or behind the wall.
If odor continues, immediately call your gas supplier. Turn off the gas line to the firebox, or if necessary, the main gas line. Use 112” rigid pipe for gas inlet and to the log lighter (inlet 1/2” npt).
Adjust log lighter valve until desired flame setting is reached. It is lit by placing a long lit match next to the burner pipe holes and turning on the gas manually using a gas valve key. If needed, use the supplied 1/2 brass plug to block off any unused connections.
Lighter must be secured in a rigid manner. Installation canterbury enterprises log lighter valve 1 turn off the gas line to the firebox or, if necessary, the main gas line 2 determine which side of the firebox the valve will be installed. Wanting to use it or possibly install gas logs at a later date, i tried to turn the valve, but lacked a key.
